MT "ULTIMATE" SMOKE PUMP

The Pump kit contains the MT pump which contains its own electronics a
and the ultimate smoke injector Kit

The MT pump is quick and easy to install. It is a unit 89mm long by
32mm and 32mm high and only weighing 3 oz?s with mounting flanges.
The unit is self contained the motor, pump and electronics internally installed.

Three wires exit the side of the smoke pump, one is a servo type cable
with a plug for connection into the receiver output. The red
and Black wires are for the pumps battery power. The single
red wire is the plus battery connection, the single black wire
is the negative battery connection. It?s the owners choice to
install a switch on the power circuit (but its RECOMMENDED)
Caution, do not reverse the power input power or damage to the
electronics may resuit.

You will need to supply a smoke fluid tank (dependent upon the size of
the engine that you are running), a smoke pump battery and an
engine with a muffler capable of getting smoke fluid into the hot
exhaust system
This system is designed to be linked to the throttle and to be set up to
be fully proportional, not just ?on? & ?off?. There is no
mechanical restriction on the flow from the pump, therefore, no
increase in pressure within the system no matter what RPM of the
engine. Because the delivery is proportional, there is no possibility of
hydraulic lock to the engine once the system is set up correctly.

!! MADE IN THE UK !!